|
|
DAEWOO
|
PUMA 700M | DAEWOO CNC Turning Centre with C axis and live tooling
Control:FANUC Series 18i-T
XZ travel:470x1600mm
Max. turning diameter:900mm
Max. turning length:2000mm
Spindle speed:1500rpm
Chuck size:800mm
Spindle bore:164mm
Toolchanger:12atc
Machine..
|
2002 |  |  |
DAEWOO
|
PUMA 400-B | One owner and superbly well maintained 2-Axis Daewoo Puma 400-B Heavy Duty CNC lathe supplied Fanuc 18i TB Control, 15”..
|
2005 |  |  |
DAEWOO
|
MYNX 540 | CONTROL FANUC 21 i - MB
TABLE DIMENSIONS mm 1200 x 500
TRAVELS X, Y, Z mm (X) 1020 mm, (Y) 510 mm, (Z) 625
TAPER ISO..
|
2002 |  |  |
DAEWOO
|
MYNX 540 | CONTROL FANUC 21 i - MB
Table dimensions mm. 1200 x 500
ROUTES X, Y, Z mm. (X) 1020 mm (Y) 510 mm, (Z) 625
CONE ISO..
|
2005 | |  |
DAEWOO
|
PUMA 2500 LSY | Daewoo Puma 2500 LSY, 23.6" swg, 43.7" lgth, 3" his, sub-spdl, y-axis, Fanuc18i-TB, 2005 F33742 ..
|
2005 |  |  |
DAEWOO
|
ACE H100 | Pallet Size 39.4" X 39.4"
Number of Pallets 2
Table Load Capacity 4400 LBS.
Axis Travel X - Axis 78.70"..
|
2000 | |  |
DAEWOO
|
MYNX 500 | FANUC 21i-M control system, table size
1.200 x 500 mm, X-axis 1.020 mm, Y-axis 510 mm, z-axis 575 mm, load on..
|
- |  |  |
DAEWOO
|
PUMA 350 LA | FANUC 18-T control system, swing over bed 700 mm,
swing over saddle 480 mm, max turning diameter 550 mm, max. turning..
|
- | |  |
DAEWOO
|
PUMA 200-2SP GL | Turning capacity 8.4” x 8”
(2) 8” Kitagawa 3 jaw Chucks
(2) 8-station turrets
Spindle 4000 rpm’s
24m/min rapids
220/60/3..
|
2000 | |  |
DAEWOO
|
DMH-400 | PALLET DIMENSION: ..
|
2002 | |  |
DAEWOO
|
PUMA 400 | Swing Over Bed: ..
|
1999 | |  |
DAEWOO
|
PUMA 400LMB | Swing over bed ..
|
2006 | |  |
DAEWOO
|
PUMA 200C | Chuck----------------------------------8" Spindle bore---------------------------3" Bar Capacity---------------------------2.5" Max. swing over bed--------------------20.1" Swing over saddle----------------------13" Max. turning diameter------------------13.4"..
|
1997 | |  |
DAEWOO
|
200LMSC | CAPACITY SWING OVER BED: ..
|
1999 | |  |
DAEWOO
|
DMH-400 | PALLET DIMENSION: 15.75" NUMBER OF PALLETS: 2
AXIS TRAVELS: ..
|
2002 | |  |
DAEWOO
|
PUMA 240MB | Control Fanuc 18i-TB Swing Over Bed 21.7" Swing Over Carriage 15.4"..
|
2004 | |  |
DAEWOO
|
PUMA V 10 | turning diameter 254 mm
swing diameter 400 mm
turning height 140 mm
spindle turning speed range 30 - 3600 U/min..
|
1996 |  |  |
DAEWOO
|
PUMA 10 | CNC LATHE
CONTROL : Fanuc system 3T-Model F
Turning length between the centers : 1000 mm
Swing over bed : 640 mm
Centre height : 320 mm
Bed length, carriage : 1240 mm
Bed length, tailstock : 1000 mm
Bed width, carriage : 450 mm
Bed..
|
1995 |  |  |
DAEWOO
|
PUMA 6G | CNC Slant Bed Lathe 46mm Bore
Turning Diameter (mm): 165
Turning Length (mm): 150/150
Number Of Turret Heads: Gang Type
Control..
|
- | |  |
DAEWOO
|
LYNX 200A | SWING OVER BED: 18.11"
SWING OVER SADDLE: 13.7"
MAXIMUM TURNING DIAMETER: 11.0" (6.5 RECOMMENDED)
MAXIMUM TURNING LENGTH: 11.81"
BAR CAPACITY: 1.77"
TRAVEL
X-AXIS TRAVEL: 6.3" (5.51..
|
1999 | |  |