|
|
ASQUITH
|
OD1 | ASQUITH OD1 4ft 6in RADIAL ARM DRILL
5MT spindle, speeds 42 – 1130 RPM, dead stop unit, 36in x 42in x..
|
- |  |  |
PROGRESS
|
NO 1 | PROGRESS No 1 BENCH DRILL
5 speeds 340 – 2580 RPM, 13in x 13in rise & fall swing away table, ½”..
|
- | |  |
MEDDINGS
|
MF5FS | MEDDINGS MF5FS 2MT PILLAR DRILL
8 speeds 100 – 3000 RPM, 10in x 11in rise and fall swing away table, dead..
|
- | |  |
BOXFORD UNION
|
2MT | BOXFORD UNION 2MT PILLAR DRILL
8 speeds 82 – 2900 RPM, 300mm diameter rise and fall swing away table, kick stop,..
|
- | |  |
KITCHEN AND WALKER
|
E3 | KITCHEN AND WALKER E3 5FT RADIAL ARM DRILL
5 MT spindle, speeds 12 – 1000 RPM, read stop, coolant, lo-volt lighting,..
|
- | |  |
KITCHEN AND WALKER
|
E2 | KITCHEN AND WALKER E2 4’6” RADIAL ARM DRILL
4MT, raiser block fitted into the column, Speeds 25 – 1560 RPM, power..
|
1982 | |  |
MEDDINGS
|
MF5/3 | MEDDINGS MF5/3 2MT PILLAR DRILL
8 speeds 100 – 3000 RPM, 11in x 10in T slotted rise and fall swing away..
|
- | |  |
POLLARD
|
100F/1 | POLLARD 100F/1 BENCH DRILL
1 MT, speeds 330 – 1870 RPM, 10in x 12in T slotted table, rise and fall head,..
|
- | |  |
KITCHEN AND WALKER
|
E2 | KITCHEN AND WALKER E2 4'6" RADIAL ARM DRILL
4MT, Speeds 25 – 1560 RPM, power locking, 36" x 20" x..
|
- | |  |
TACCHI
|
FT 45 S CNC - 500 X 3000 | TACCHI HORIZONTAL HIGH PERFORMANCE DEEP HOLE BORING MACHINE
Model FT 45 S CNC – 500 x 3000
Year 2011
Control system SIEMENS 840 DE
Machine suitable for..
|
2011 | |  |
MOLLART
|
MATRIX DHD1510-18S | MOLLART CNC 3 AXIS DEEP HOLE DRILLING MACHINE
Model MATRIX DHD1510-18S
Year 2011
Control system FANUC 0i-MD
Drilling diameter range from solid 2 mm - 40 mm
Drilling depth Z..
|
2011 | |  |
DONAU
|
DR32 | DONAU DR 32 RADIAL ARM DRILL
Speeds 41 - 1800 RPM, power elevation, power down feed to 4MT quill, power..
|
- | |  |
PEDDINGHAUS
|
OCEAN AVENGER PLUS 1250/1C | PEDDINGHAUS OCEAN AVENGER PLUS 1250/1C SINGLE SPINDLE DRILL LINE
MFG:2016 - ONLY 1620 HOURS - UNDER POWER BUT NOT CURRENTLY USED
FOR..
|
2016 |  |  |
CASER
|
F35 | CASER Radial Drill
Type:F35
Table size:750x550mm
Maximum distance spindle to column:1200mm
Column diameter:305mm
Vertical travel of spindle:305mm
Spindle taper:#4 MT
Spindle speed(12):64-2100
Approx. weight:2500kg..
|
- |  |  |
CASER
|
F35A | CASER Radial Drill
Type:F35A
Year:
Drilling in the full:35mm
Drilling with pilot hole(D/2):60mm
Thread:35mm
Max. radius of drilling:1125mm
Max. distance between pin and base:1350mm
Bore:85mm
Column diameter:250mm
Spindle motor:3,5-3hp
Rotational speed(14):47-2120rpm
Machine..
|
- | |  |
RICHMOND
|
SR3 | Richmond SR3 40” radial arm drill 3mt with rise and fall table..
|
2000 | |  |
ASQUITH
|
PORTABLE RADIAL | ARM LENGTH 72”
SPINDLE TAPER 6 MORSE
Machine in excellent condition, feeds to spindle, fully run and checked. ..
|
- | |  |
AGIE CHARMILLES
|
ACTSPARK SD-1 | MAKE AGIE CHARMILLES
MODEL ACTSPARK SD-1
YEAR 2007
X AXIS 300 MM
Y AXIS 200 MM
Z AXIS 300 MM
WORKTANK LENGTH 750 MM
WORKTANK WIDTH 490 MM
WORKTABLE DIMENSIONS 300 X 400 MM
OVERALL..
|
- | |  |
CSEPEL
|
RF 31B | MAKE CSEPEL
MODEL RF 31B
ARM LRNGHT 2000 mm
MORSE TRAER MT 4
SPINDLE SPEED Up to 1900 RPM
PLUS HYDRAULIC CLAMPING
BOX TABLE
FULLY WORKING MACHINE
..
|
- | |  |
MUGI
|
M-15 | MANUFACTURER MUGI
MODEL M-15..
|
- |  |  |
ANJO
|
TS-18 | TYPE TABLE COVER
BORING CAPACITY mm 18
TRANSMISSION BELT..
|
- | |  |
MAS
|
VO 63 | TYPE RADIAL
BORING CAPACITY mm 63
TAPER CM-6
TRANSMISSION GEARS
MAIN MOTOR POWER Kw. 10..
|
- | |  |
ZUDAM
|
TZ DE 22 | TYPE COLUMN
BORING CAPACITY mm 22
TAPER CM-1
EXTERNAL DIMENSIONS mm 450 x 850 x 1800..
|
- | |  |
VOEST-ALPINE
|
UNKNOWN |
TYPE RADIAL..
|
- | |  |
UNKOWN
|
UNKNOWN | unknown..
|
- | |  |
IBARMIA
|
EA40 | TYPE COLUMN
BORING CAPACITY mm 40
TAPER CM-4
TRANSMISSION GEARS
EXTERNAL DIMENSIONS mm 580 x 1150 x 2350..
|
- | |  |
IBARMIA
|
70 BR | MODEL 70 BR
TYPE COLUMN
BORING CAPACITY mm 80
MAIN MOTOR POWER Kw. 7,5..
|
- | |  |
POLLARD
|
PILLAR DRILL 2 | Pollard pillar drill 2 morse taper..
|
- | |  |
STARTRITE
|
MERCURY | Startrite Mercury Pillar drill..
|
- | |  |
ASQUITH
|
ASR 36” | Asquith ASR 36” radial arm drill with rise and fall table, 3 morse taper and spindle brake..
|
- | |  |
RICHMOND
|
SR2 | Richmond SR2 40” radial arm drill 3 morse taper with rise and fall table and spindle brake. Very quiet runner..
|
- | |  |
ASQUITH
|
OD1 | Asquith OD1 4’6” radial arm drill,5 morse taper,box table,spindle brake,coolant,rewired.Very nice example,runs well...
|
- | |  |
ELHA
|
65 / 75 | bore capacity in steel (diameter) 65mm
bore capacity in cast iron 75mm
throat 450mm
bore stroke 300mm
bore spindles - Morse Taper MK 5
Number of revolutions 20 - 1.585mm/-1
transmission ratio 3
transmission..
|
1983 |  |  |
FLOTT
|
TB 15 | table surface area 290 x 320mm
throat 260mm
bore stroke 90mm
table adjustment - upper 400mm
taper MK 2
threading
Number of revolutions 200 - 3.000rpm
total power requirement 1kW
weight of the machine ca. 150kg
dimensions..
|
- | |  |
KOLB
|
* | bore capacity in steel (diameter) 80mm
arm length 1.600mm
workpiece height max. 950mm
distance spindle/base plate 600/ 1430mm
distance between table/spindle 100/ 950mm
total power requirement 6,1kW
weight of the machine ca. 2,5t
dimensions..
|
- | |  |
MEDDINGS
|
TABLE | MEDDINGS 4 POSITION TABLE WITH DRILLS
2 OFF MEDDINGS PACERA M4
1 OFF MEDDINGS PACERA L2
1 OFF MEDDINGS PACERA L1
SPECIFICATION
Pacera M4..
|
- | |  |
WILTON
|
JS-2221VS | USED WILTON 20” VARIABLE SPEED DRILL PRESS
MODEL: J-2221VS ♦ YEAR: 2007
Stock No: W-1369
Specifications:
Capacity:
..
|
2007 | |  |
FRANKLIN
|
HD-145 | USED FRANKLIN CNC 3 SPINDLE STRUCTURAL DRILL SYSTEM
MODEL HD-145 ♦ YEAR: 2001
Stock No. W-1329
Specifications:
Maximum beam width: 40” WF
Beam feed..
|
2001 | |  |
FRANKLIN
|
F1787 | USED FRANKLIN PLATE DRILL
MODEL F1787 ♦ YEAR: 1992
Stock No. W-1328
Specifications:
Capacity: 72” x 120”
Maximum drill diameter: 2”
X & Y Axis feed..
|
1992 | |  |
STANKO
|
2 M 55 | RADIAL DRILLING MACHINE
Taper : 5 mk
Drilling capacity : 55 mm
Throat, max : 375 - 1.600 mm
Distance, spindle - floor plate : 450 - 1.600 mm
Floor plate dimensions : 1.650 x 825 mm
Drilling depth : 400 mm
RPM spindle..
|
1981 |  |  |
STANKOIMPORT
|
2H57 | bore capacity in steel (diameter) 75 mm
arm length 2500 mm
workpiece height max. 1600 mm
tool taper 5 MK..
|
1967 | |  |
CSEPEL
|
RF31-C | bore capacity in steel (diameter) 60 mm
arm length 1750 mm
workpiece height max. 2000 mm
spindle turning speed range..
|
1969 | |  |
ASQUITH
|
6 PT 19-72 | RADIAL DRILLING MACHINE
Taper : 6 Mc
Throat : 1.600 mm
Drilling capacity, steel, full material : 63 mm
Drilling capacity, iron, full material : 80 mm
Drilling depth : 430 mm
Height between spindle - feet, min. - max. : 750 -..
|
- | |  |
WMW HECKERT
|
BR 40/2×1250 | Maximum drilling diameter 60 mm
Maximum spindle stock travel 1250 mm
Maximum workpiece height 1380 mm..
|
- |  |  |
ARCHDALE
|
RADIAL | Table Area: 600mm x 900mm
Main Drive Power: 415volts/3 phase
Spindle Speeds: 15 to 1500 rpm
Spindle Taper: MT5
Radius..
|
- | |  |
MAS
|
VR4A | Taper : 4 mc
Troath depth : 1.150 mm
Drill capacity : 45 mm
Depth of hole : 300 mm..
|
- | |  |
OTTO-MÜLLER
|
SR 23 | bore capacity in steel (diameter) 23 mm
arm length 1020 mm
workpiece height max. 400 mm
bore capacity in cast..
|
1984 | |  |
OTTO-MÜLLER
|
SR23 | bore capacity in steel (diameter) 23 mm
arm length 1020 mm
workpiece height max. 400 mm
bore capacity in cast..
|
1988 | |  |
HERBERT
|
CS | Ref : PER008
Brand : HERBERT
Model :
Drilling capacity (mm) : 28
Max distance frame-tool (mm) : 260..
|
- |  |  |
RECORD
|
M-2 | Tapping machine..
|
- |  |  |
ASQUITH
|
NC 3A5 | YEAR 1975;TABLE 84X42; X=56INCH; Y-34INCH; 72INCH B-C; 10TO 2000 RPM; FEED RATE .006 TO .045; VERY GOOD CLEAN MACHINE IN..
|
1975 | |  |
MODIGS
|
MODIGS | Feeds: Yes
Throat: 590mm
Max Drilling Capacity: 11/2\"
Table Area: 450mm x 450mm
Main Drive Power: 415 volts
Spindle Speeds:..
|
- | |  |
WMW
|
WMW | Weight: One Ton
Size of Base: 960 x 550mm
Spindle to Column: 320mm
Quill Travel: 240mm
Max Distance Spindle to..
|
- | |  |
GSP
|
GSP | Morse taper (MT) : 2/3
Number of spindles : 23
Table size (mm) : 1000 x 1000
Vertical travel (mm)..
|
- | |  |
DONAU
|
DR 23 | bore capacity in steel (diameter) 23 mm
arm length 995 mm
workpiece height max. 450 mm
bore capacity in cast..
|
1971 | |  |
HMT
|
RM63/1400 | Maximum boring diameter 50 mm
Maximum spindle stock travel 1400 mm
..
|
- | |  |
POLLARD
|
15X | Drilling Machine - Pillar 4 morse
Column Diameter: rise & fall
Feeds: no
Table Area: rise & fall
Spindle Speeds: 84-1465..
|
- | |  |
MOSTANA
|
MOSTANA | Max Workpiece Height (Spindle to Base): 18"
Spindle Taper: MT5
Elevating Arm / Table / Portable / Unive: Elevating..
|
- | |  |
MEDDINGS
|
A10 | Radial Drill - Articulated Arm No. 2 Morse Taper
Feeds: Manual
Max Drilling Depth: 100
Max Workpiece Height: 500
Max Travel..
|
- | |  |
RICHMOND
|
SR2 | Radial No 3 MT x 36" Radius
Max Workpiece Height: 26"
Max Travel Of Drilling Head On Slide: 25.1/2"
Max Drilling..
|
- | |  |
QUARTERS-SMITH
|
QSR2 | Max Travel Of Drilling Head On Slide: 390mm
Throat: 740
Max Drilling Capacity: 32mm
Table Area: 530 x 450mm
Main..
|
- | |  |
MEDDINGS
|
MEDDINGS | Main Drive Power (KW/V/Hz): 415vlt/3 phase
Min/Max Workpiece Height: 8"
Tapping: Yes
Max Drilling Stroke: 4"
Max Drilling Capacity: 15mm..
|
- | |  |
MEDDINGS
|
A10 | Articulated Arm No. 2 Morse Taper
Feeds: Manual
Max Drilling Depth: 100
Max Workpiece Height: 500
Max Travel Of Drilling..
|
- | |  |
QUARTERS-SMITH
|
DRILLMASTER | Multi Spindle No1 Morse Tapers
Max Number Of Spindles (No.): Five
Spindle Tapers: No1
Table Size: 72" x 20" tee slotted..
|
- | |  |
POLLARD
|
15X | 4 morse
Column Diameter: rise & fall
Feeds: no
Table Area: rise & fall
Spindle Speeds: 84-1465 rpm
Spindle Taper:..
|
- | |  |
STARTRITE
|
EFI - FC | 1" Capacity
Throat (mm): 12"
Spindle Head Adjustment: Yes
Quill Stroke (mm): 100mm
Distance Spindle /Table (mm): 26"
Spindle Speeds: 125..
|
- | |  |
WMW
|
BKR 4X2 A1 TWIN SPINDLE | 4 MT, speeds 63 – 1000 RPM, power feed on both heads, tapping on one, R & F heads, 37..
|
- | |  |
ARCHDALE
|
ARCHDALE | Spindle Taper: No 4
Radius Of Arm: 3ft 6"
..
|
- | |  |
RECORD
|
M 2 | Tapping machine RECORD M 2.
..
|
- | |  |
JOANNES
|
T.16 | Tapping machine JOANNES, T.16
..
|
- | |  |
SERRMAC
|
DIGIT 3 | CNC drilling and milling machine SERRMAC DIGIT 3, drilling diameter on steel 40 mm, tapping on steel M 26, spindle..
|
- | |  |
SASS
|
TC 50 | Drilling and milling machine SASS TC 50, drilling diameter 50 mm, table size 700 x 350 mm...
|
- | |  |
ROSA
|
TMS 48 TC | Drilling and milling machine ROSA TMS 48 TC, drilling diameter 48 mm, table size 690 x 275 mm...
|
- | |  |
IM
|
IMMP/45 | Drilling and tapping machine IM IMMP/45, table size 395 x 380 mm, with multiple spindle head (8 spindle)...
|
- | |  |
FAMUP
|
TP 32 | Drilling machine FAMUP TP 32, drilling diameter 32 mm, table size 800 x 400 mm.
..
|
- | |  |
BERARDI
|
VBM III Z | Drilling machine BERARDI VBM III Z, with multiple spindle head...
|
- | |  |
NOVISA
|
TR 1300 | Radial drill NOVISA TR 1300, drilling diameter 40 mm, length of arm 1.300 mm, with box table, power locking..
|
- | |  |
ITAMA
|
T 40/900R | Radial drill ITAMA T 40/900R, drilling diameter 40 mm, length of arm 900 mm, with box table...
|
- | |  |
INVEMA
|
FR 40 1250 | Radial drill INVEMA FR 40 1250, drilling diameter 40 mm, length of arm 1.250 mm, with box table.
..
|
- | |  |
CMEC
|
Z 3025 X 10 | Radial drill CMEC Z 3025 X 10, drilling diameter 25 mm, length of arm 1.000 mm, with box table.
..
|
- | |  |
CASER
|
35-915 | Radial drill CASER 35-915, drilling diameter 35 mm, length of arm 915 mm, with box table.
..
|
- | | - |
CARIMATI
|
CTU 35/45I | Radial drill CARIMATI CTU 35/45, drilling diameter 45 mm, length of arm 1.250 mm, with box table...
|
- | |  |
BREDA
|
R 950 MS | Radial drill BREDA R 950 MS, drilling diameter 40 mm, length of arm 950 mm, with box table...
|
- | |  |
BREDA
|
R 915 L | Radial drill BREDA R 915 L, drilling diameter 40 mm, length of arm 915 mm, with box table...
|
- | | - |
BREDA
|
R 60-2000 | Radial drill BREDA R 60-2000, drilling diameter 60 mm, length of arm 2.000 mm, with box table, power locking..
|
- | |  |
BREDA
|
R 1580 MP | Radial drill BREDA R 1580 MP, drilling diameter 50 mm, length of arm 1.600 mm, with box table, power locking.
..
|
- | |  |
BERGONZI
|
F 1000 | Radial drill BERGONZI F 1000, drilling diameter 32 mm, length of arm 1.000 mm, with box table...
|
- | |  |
WEBO
|
VARIA | Drilling-Machine - capacity ST 60 23 mm - vario rpm -
max. Distance Table/Spindle 760 mm -..
|
- | |  |
ELLIOTT
|
- | Drilling Machine - Radial Arm No 4 morse taper x 36\"
Table Area: 30" x 20" x 20" Box
Spindle Speeds:..
|
- | |  |
OTTO-MÜLLER
|
SR-23 | Tisch 1280 x 500 Schnellradial Bohrmaschine ..
|
1960 | | - |
BLUTHARD
|
TISC6-B AST | h 630 x500 Ständerbohrmaschine MK-4 ..
|
1977 | |  |
BÖHRER
|
STB-2 | MK-2 Tischbohrmaschine ..
|
1956 | | - |
MEDDINGS
|
TC 20T | Control: PC (NE Electronics)
Z Axis: 500mm
Y Axis: 250mm
X Axis: 500mm
Table: 800mm x 300mm
Turret: 6 station..
|
- | |  |
KITCHEN-WADE
Auction item |
E32-MK2 | Radius of drill spindle (max) 1372 mm, Radius of drill spindle (min) 406 mm, Traverse of head along arm 1372..
|
1974 | |  |